教育培训
DH001-OrCAD Capture (2 days)
- Lesson 1 Getting Started with Orcad Capture
- Lesson 2 Setting up your Environment
- Lesson 3 Creating Part Libraries
- Lesson 4 Creating Homogeneous Parts
- Lesson 5 Creating Heterogeneous Parts
- Lesson 6 Creating Parts from a Spreadsheet
- Lesson 7 Creating Symbols
- Lesson 8 Building a Simple Schematic
- Lesson 9 Processing a Schematic Design
- Lesson 10 Building a Multi-sheet Schematic
- Lesson 11 Processing a Multi-sheet Schematic
- Lesson 12 Other Tools in Orcad Capture
- Lesson 13 Editing Properties
- Lesson 14 Building a Hierarchical Design
- Lesson 15 Creating a Hierarchical Block
- Lesson 16 Processing a Hierarchical Design
- Lesson 17 Preparing the Designs for PCB Editor (Allegro)
DH002_PSpice Simulation Soultion(2Days)
- Part1:PSpice简介
- Part2:PSpice名词解释
- Part3:建立可仿真的PSpice电路原理图
- Part4:直流工作点分析
- Part5:直流扫描分析DC Sweep Analysis
- Part6:交流扫描分析AC Sweep Analysis
- Part7:仿真文本网络表Text Netlist
- Part8:激励源编辑器
- Part9:瞬态分析Transient Analysis
- Part10:综合练习1
- Part11:参数扫描分析Parametric Analysis
- Part12:温度扫描分析Temperature Analysis
- Part13:蒙特卡罗Monte Carlo Analysis
- Part14:最坏情况分析 Worst Case Analysis
- Part15:噪声分析 Noise Analysis
- Part16:综合练习2
- Part17:数字电路仿真
- Part18:模/数混合电路仿真
- Part19:非周期性数字输入信号源
- Part20:数字电路的自动查错功能
- Part21:数字电路的最差情况分析
- Part22:关于PSpice仿真
DH003_Allegro PCB(4Days)
- 1.Allegro User Interface
- 2.Allegro工作环境
- 3.线上Help
- 4.Env (Environment) File
- 5.Pad的分类及建立|
- 6.Symbol的分类及建立
- 7.板框的建立
- 8.netlist file的导入
- 9.DXF的导入倒出
- 10.Advanced Placement
- 11.Setting Design Constraints
- 12.Design Rules
- 13.Routing and Glossing
- 14.Copper Areas and Positive or Negative
- 15.Reference Designators
- 16.Generation Reports
- 17.Generating Artwork
目前,基于工程应用培训我们开设有三个课程:
1、PSpice电路仿真解决方案:
课程介绍:根据客户实际应用的典型电路,我们从工程应用角度专门编写培训教材。教材将以该案例结合PSpice完整解决方案为客户工程师实训。
2、高速电路信号完整性分析课程:
课程介绍:该课程将分三阶段进行。
第一阶段:信号完整性理论知识及仿真基础知识;
第二阶段:结合客户使用的SI仿真软件进行实际结合并理解;
第三阶段:结合客户的工程利用主流SI软件实行实训。
3、电磁场仿真分析:
课程介绍:主要就GEMS软件结合客户工程进行实训。
上述课程,如客户感兴趣,可与我公司联系,获取更多培训具体细节。